Solid Plastic Styles


BENEFITS OF HDPE

Solid Plastic bathroom partitions are impermeable to moisture and will not support the growth of mold & mildew.
They are solid color throughout and will not chip so they never need painting, because of this they will not deliver any VOC emissions and select manufacturers such as Scranton Products are Greenguard Gold Certified.
Additional benefits of HDPE include being fully power washable and steam cleanable and they resist bacteria, odors, moisture, mildew and will never rust unlike metal.

SUSTAINABILITY BENEFITS OF HDPE

• Made from recycled materials
• Improved air quality
• Contains 25-100% post-industrial recycled material
• Available with 100% post-consumer content
• 100% recyclable
• Factory responsible recycling
• Contributes to LEED points

UNDERSTANDING DIFFERENCES IN PLASTIC COMMERCIAL RESTROOM PARTITIONS

There are three main “plastic” based commercial restroom materials in the marketplace. High Density Polyethylene referred to as HDPE, Solid Color Reinforced Composite (SCRC), and Phenolic. HDPE is constructed from 1” solid plastic and is homogenous color throughout. This material will resist dents, scratches, corrosion, graffiti & mildew & will never rust. SCRC bathroom partitions are made from a homogenous composite of cellulose fibers, dyes & resins with a GraffitiOff surface coating. Phenolic bathroom partitions are comprised of a melamine sheet then multiple layers of resin impregnated paper.
So what does this all mean for your restroom partitions? Multiple tests have been conducted to help guide you on which plastic provides the best total performance in the follow categories: Microbial Resistance, Surface Durability, Graffiti Removal, Screw Retention, Cost of Ownership and Sustainability.

MICROBIAL RESISTANCE

Testing conducted in accordance with ASTM D3292. The results are shown in the chart. Samples were scored on a 0-10 scales, where 10 is the best microbial resistance. HDPE & SCRC showed no growth during the testing period where as Phenolic showed mold and mildew growth in just 21 days and more as time continued.

MICROBIAL-RESISTANCE

SURFACE DURABILITY

The abrasion resistance of the plastic bathroom partition materials was measured in accordance with ASTM G195 using a CS-10 abrasion wheel. This wheel was selected for this test because of its mild to medium abrading action, like that of normal handling, cleaning or polishing.
The test results show that HDPE has the best abrasion resistance with the lowest surface wear. Phenolic and SCRC have a higher surface wear and once the surface in compromised on the Phenolic or SCRC materials stains may be more difficult to remove and leave a ghosting effect.

SURFACE-DURABILITY

GRAFFITI RESISTANCE

Graffiti resistance testing was conducted in accordance with ASTM D6578. The test provides a standard set of conditions that can be used to evaluate the graffiti resistance of a surface. When using a Scranton Products HDPE and recommended cleaning solutions graffiti was easily removed in all instances. Phenolic and SCRC have an exterior coating to prevent graffiti that may deteriorate over time and may require special maintenance such as waxing. When using HDPE the material does not require a special coating and no additional maintenance.

GRAFFITI-RESISTANCE

<

SCREW RETENTION

Using a tensile tester, the force required to pull a (9” x 2.5”) screw fastener from the bathroom partition material was measured. The testing showed that the SCRC material failed at less than half the pull then HDPE or Phenolic. This could impact the durability of the partition system and its ability to support the mounted hardware.

SCREW-RETENTION

TOTAL PRODUCT COST VS. LENGTH OF WARRANTY

Phenolic and SCRC both have higher starting costs and lower warranties than HDPE. Overall, HDPE has the lowest cost of ownership due to its performance, durability and long warranty.

COST-VS-WARRANTY

SUSTAINABILITY:

HDPE partitions provide the best sustainability story when compared to Phenolic & SCRC. Select manufactures such as Scranton Products provide 25-100% pre-consumer content, offer 100% post-consumer content and are 100% recyclable. HDPE also does not contain any added Urea-Formaldehyde resins.

SUSTAINABILITY

OVERALL PERFORMANCE:

OVERALL-PERFORMANCE

Throughout all the independent lab testing it reveals that Scranton Products HDPE provides the best total performance compared to SCRC and Phenolic. This means you purchasing HDPE you are investing in peace of mind that you are getting a material that will with stand the harsh environments of commercial bathroom partitions.

Benefits of HDPE compared to Stainless Steel bathroom partitions

Do you love the look of stainless steel but wish you could have the same durable benefits you get with High Density Polyethylene bathroom partitions?
By selecting Scranton Products HDPE in their stainless-steel rotary brushed color and finish it can give you the look you desire that will last.
Did you know that not all bathroom partitions are solid throughout? HDPE is comprised of polyethylene resin and pigment and is solid color throughout where as Stainless-Steel partitions are manufactured with a honeycomb or wood core glued under pressure to #304 stainless steel sheets and assembled with roll formed molding. Stainless Steel partitions are at a high risk for moisture penetration because of this and it increases dramatically when they are placed into restrooms or shower rooms due to the high humidity in these environments. +

stainless-vs-plastic

Additional challenges with Stainless-Steel partitions is they are susceptible to dings, dents and event rust is very common. Testing following ASTM standards shows that HDPE partitions have 59 times greater resistance to impacts when compared to Stainless Steel and HDPE will absolutely never rust.

scratches-smudging

impact-test

And if you are not sold yet, HDPE partitions initial cost is lower than traditional stainless steel partitions and will provide significantly lower cost over time.